Lexmark X4850 Ink Cartridges
Save $46.00 (59% off retail price)
Save $68.50 (60% off retail price)
Save $118.00 (61% off retail price)
Save $21.00 (57% off retail price)
Save $24.00 (59% off retail price)
How to change Lexmark X4850 ink cartridges on printer?
- Plug the machine to the power source and turn it on.
- Open the scanner cover. This will automatically move the ink cartridge carrier ready for cartridge installation.
- Press down on the lever to raise the cartridge lid then you can unload the used cartridge.
- Get your new CompAndSave's Lexmark X4850 ink cartridge. Open it over a sink or garbage can to avoid any messes in case it leaks as sometimes, factories tend to overfill ink cartridges.
- Remove the covering tape that is usually bright in color as well as the plastic protective case, if there is, before installing it.
- Install the Lexmark X4850 ink cartridges on their respective slot. Black cartridge at the left hand side, and color cartridge at the right hand side.
- Close the ink holder cover and the scanner lid.
- You can now start doing the Page Alignment test.
Most Common Lexmark X4850 Ink Cartridges Questions
- How do I get my Lexmark printer to recognize my refilled cartridge?
- To fix this issue, just remove the ink cartridge from the printer, then wipe the electrical contacts with a non-abrasive towel or clothe with water or alcohol. After this turn off the printer for 15 minutes then reinstall the cartridges. For detailed instruction, just click ink troubleshooting tips and you will be redirected to the right page.
- Why does my printer not recognize my ink cartridge?
- There are several reason on why your Lexmark printer won't recognized refilled cartridge. Most common reason is due to incorrect cartridge. So first step is to make sure that you are installing the correct cartridge into your printer. To verify this, you may check the printer's manual or may check the existing cartridge in your printer. In front of the cartridge is a label or sticker with the model number which is usually consisted of alphanumeric characters. Another common reason is due to tainted contacts. To fix this, just wipe the electrical contacts with a non-abrasive towel or clothe with water or alcohol. After this turn off the printer for 15 minutes then reinstall the cartridges. For detailed instruction, just click ink troubleshooting tips and you will be redirected to the right page.
Replacement Lexmark X4850 Ink Cartridges Reviews
-
Review for Replacement Lexmark 44XL Ink Cartridge - 18Y0144 Black - High YieldThe ink fits, and the printer prints, but it constantly pops up errors about the cartridge being incompatible. It wants to run alignment checks all the time, and these must be cancelled out of to avoid wasting paper and ink.Was this review helpful?
-
They work great, thanks!Review for Replacement Lexmark 44XL 43XL Ink Cartridges 3-Pack - High Yield: 2 x 44XL Black and 1 x 43XL ColorThey work great, thanks!Was this review helpful?
-
Review for Replacement Lexmark 44XL Ink Cartridge - 18Y0144 Black - High YieldThis is the best replacement cartridge I have every used.Was this review helpful?