Brother MFC-465CN Ink Cartridges
Save $67.76 (86% off retail price)
Save $191.90 (88% off retail price)
Save $709.70 (90% off retail price)
Save $26.50 (90% off retail price)
Save $13.50 (82% off retail price)
Save $13.50 (82% off retail price)
Save $13.50 (82% off retail price)
How To Install Brother MFC-465CN Ink Cartridges?
- Open the ink access cover, which can be found on the right side of the printer.
- Open the lock lever by pulling it down, then pull the cartridge out from the printer.
- Get your new CompAndSave Brother 465CN ink cartridge. Open it over a sink or garbage can to avoid any mess in case it leaks as sometimes, factories tend to overfill the ink cartridges. Make sure to touch the black plastic part only, then remove the covering tape that is usually bright in color as well as the plastic protective case, if there is, before installing it.
- Insert the new Brother MFC-465CN printer ink cartridge to its respective slot, then put the lock lever back push it until it snaps lock into place.
- Close the ink access cover and follow the on-screen instruction on the printer's panel.
Brother MFC-465CN Ink Cartridges FAQs
- Can I use off-brand ink in my Brother printer?
- Yes, you can. CompAndSave's generic, compatible, replacement, or remanufactured ink cartridges are designed to meet or exceed the OEM specifications. This means that you can get the same print quality and the number of prints without paying as much compared to the original Brother ink cartridges. Aside from this, using generic ink cartridges will never void the printer's warranty, so you can shop and use our ink cartridges without any worries. For more information about our ink cartridges, click our Ink Knowledge Base.
- How do I get my Brother printer to accept compatible cartridges?
- By default, compatible, replacement, or remanufactured ink cartridges should automatically work without doing any configuration. In case your printer didn't print after installing these types of cartridges, the first thing to do is to verify that you are installing the correct cartridge. To verify this, you may check the printer's manual or check the previous cartridge that works on your printer. In front or on the side should be a label with the model number. For example, Brother MFC-465CN printer uses a cartridge that has the model code of Brother LC-51. Once this is verified, the next step is to remove the cartridge and reinstall it back to your printer. You should hear a click indicating that the cartridge is properly installed inside the machine, then turn off your printer for 15 minutes. For more information, click our Troubleshooting Tips and you will be redirected to the right page.