
How To Install Epson WF-3730 Ink Cartridges
Epson WF-3730 Ink Cartridges - Epson WorkForce Pro WF-3730 Ink
Save $36.23 (46% off retail price)
Save $210.00 (67% off retail price)
Save $26.04 (65% off retail price)
Save $14.54 (57% off retail price)
Save $14.54 (57% off retail price)
Save $14.54 (57% off retail price)
How to change Epson WF-3730 ink cartridges on printer?
- Make sure that the printer is turned on. If you are replacing the ink cartridge before it runs out, just press the "Home" button, then "Maintenance", followed by "Ink Cartridge Replacement", and lastly press "Next" and "Start".
- Lift the scanner lid of the printer until it locks into place. Avoid touching or moving the printhead manually as it may damage the printer.
- To release the ink cartridge, just gently push the plastic tab at the end of the cartridge then pull it out from the printer.
- Get your new CompAndSave's Epson WF-3730 ink cartridge, shake it for about four to six times before opening from the package. Open it over a sink or garbage can to avoid any messes in case it leaks as sometimes, factories tend to overfill ink cartridges. Make sure to touch the black plastic part only, then remove the covering tape that is usually bright in color as well as the plastic protective case, if there is, before installing it.
- Insert the Epson WF-3730 ink cartridge to its respective slot, you should hear a snap indicating that it's locked in place.
- Close the scanner lid then press the "Completed" button. The printer will automatically go through the ink charging process. Let this process run until its done to avoid wasting ink.
Most Common Common Epson WF-3730 Ink Cartridges Questions
- What ink does Epson WF-3730 use?
- Epson WF-3730 printer uses Epson 702XL ink cartridges. It comes in black, cyan, magenta, and yellow ink cartridges.
- Can I print if one cartridge is empty Epson?
- Yes, on some Epson printer models, it is possible to continue printing even if one ink cartridge is empty. To temporarily enable this feature, make sure that you have the printer driver and status monitor installed on your computer. Next, is to cancel any print jobs on queue, then load a plain white paper or envelope in the paper tray. Open the Epson program on your computer and go to the "Main Tab", after this select "Quality Option Setting". On the "Type Setting", select "Plain Papers" or "Envelope" and then, select "Grayscale" in the print options. Once done, press "OK" to apply changes and to close the Epson status monitor. After all this, proceed with printing your file. The Epson status monitor should appear on your computer screen again, once this happens click "Print in Black" to finish printing your file. Please note that these steps and features are not applicable for all Epson printer models. To verify you may contact your printer manufacturer to check if you can do this on your printer, but we highly encourage you to replace any empty or low ink cartridges to avoid printing issues. CompAndSave offers a wide variety of cheap printer ink cartridges without compromising its quality so you can print to your heart's content.