Okidata MB461 Toner Cartridges
Save $76.01 (73% off retail price)
Save $141.11 (81% off retail price)
Save $145.61 (72% off retail price)
How to Install Okidata MB461 Toner Cartridges?
- Open the printer's top cover.
- Turn the lock lever to unlock position to release the toner, then carefully pull the toner cartridge out from the printer.
- Get your new CompAndSave Oki MB461 toner cartridge. Open the cartridge over a sink or garbage can to avoid any messes in case of a powder leak, as sometimes, factories tend to overfill toner cartridges. Gently shake the toner cartridge and avoid touching the bottom part of the toner, then remove the covering tape that is usually bright in color as well as the plastic protective case, if there is, before installing it.
- Carefully align and insert the new toner cartridge into the slot. Turn the lock lever back to its original position to secure the cartridge.
- Close the printer's top cover.
Okidata MB461 Toner Cartridges FAQ's
- Is it OK to use compatible toner cartridges?
- Yes, compatible, replacement, or remanufactured toner cartridges are designed to meet or exceed the OEM specifications. This means that you can get the same print quality and the number of prints without paying as much compared to the original toner cartridges. Our compatible, replacement or remanufactured toner cartridges are also covered with a 1-year 100% satisfaction guarantee, and using these types of toner cartridges will not void your printer's warranty. For more information, click ink knowledge base and you will be redirected to the right page.
- Why the new toner cartridge is not working?
- First, make sure that you are using the right toner cartridge for your printer. To verify, you may check the printer's manual and check if you installed the right model number of toner to your printer. Next, is to remove the toner cartridge from the printer, then shake the toner cartridge for about 5 to 6 times. Make sure to cover the cartridge with plastic to avoid leaking. After this, make sure that the toner is properly seated to its slot and make sure that it is secured in place. For more troubleshooting tips, click Troubleshooting Tips and you will be redirected to the right page.