Loading...
Free shipping on orders $50 or more
All ink & toner come with a one-year 100% satisfaction guarantee.
Our products will never void your printer's warranty.

Xerox WorkCentre 5230A Toner Cartridges from $39.99

Loading...
  • Xerox 106R1306 Black Laser Toner Cartridge
    Retail Price: $273.00
    $39.99
    Save $233.01 (85% off retail price)

How to Install Xerox WorkCentre 5230A Toner Cartridges?

  1. Open the printer's front cover.
  2. Grab the toner cartridge that needs to be replaced by the handle, then carefully pull it out from the printer.
  3. Get your new CompAndSave Xerox WorkCentre 5230A printer toner cartridge. Open the cartridge over a sink or garbage can to avoid any messes in case of a powder leak, as sometimes, factories tend to overfill toner cartridges. Avoid touching the bottom part of the toner, then remove the covering tape that is usually bright in color, as well as the plastic protective case, if there is, before installing it.
  4. Carefully align and insert the new toner cartridge into the slot until it clicks into place.
  5. Close the printer's front cover.

Xerox WorkCentre 5230A Toner Cartridges FAQ's

Is it OK to use compatible toner cartridges?
Yes, compatible, replacement, or remanufactured toner cartridges are designed to meet or exceed the OEM specifications. This means that you can get the same print quality and the number of prints without paying as much compared to the original toner cartridges. Our compatible, replacement or remanufactured toner cartridges are also covered with 1-year 100% satisfaction guarantee, and using these types of toner cartridges will not void your printer's warranty. For more information, click ink knowledge base and you will be redirected to the right page.
Why is my toner cartridge not working?
First, make sure that you are using the right toner cartridge for your printer. To verify, you may check the printer's manual and check if you installed the right model number of toner to your printer. Next, is to remove the toner cartridge from the printer, then shake the toner cartridge about 5 to 6 times. Make sure to cover the cartridge with plastic to avoid leaking. After this, make sure that the toner is properly seated to its slot and make sure that it is secured in place. For more troubleshooting tips, click Troubleshooting Tips and you will be redirected to the right page.