How To Install Epson WF-2630 Ink Cartridges
Epson WF-2630 Ink Cartridges - WorkForce WF-2630 Ink
MOST POPULAR
High yield cartridge. Contains more ink and print more pages.
Retail Price: $80.96
$25.96
Save $55.00 (68% off retail price)
High yield cartridge. Contains more ink and print more pages.
Retail Price: $140.94
$37.74
Save $103.20 (73% off retail price)
High yield cartridge. Contains more ink and print more pages.
Retail Price: $251.89
$63.69
Save $188.20 (75% off retail price)
High yield cartridge. Contains more ink and print more pages.
Retail Price: $29.99
$6.95
Save $23.04 (77% off retail price)
High yield cartridge. Contains more ink and print more pages.
Retail Price: $16.99
$6.95
Save $10.04 (59% off retail price)
High yield cartridge. Contains more ink and print more pages.
Retail Price: $16.99
$6.95
Save $10.04 (59% off retail price)
High yield cartridge. Contains more ink and print more pages.
Retail Price: $16.99
$6.95
Save $10.04 (59% off retail price)
How Do I Change The Ink In My Epson WF-2630 Printer?
- Make sure that the printer is turned on. If you are replacing the ink cartridge before it runs out, just go to "Setup" then press "OK", followed by "Maintenance", then "Ink Cartridge Replacement", and lastly press the "Start" button.
- Open the scanner lid of the printer, avoid touching or moving the printhead manually as it may damage the printer.
- To release the ink cartridge, just gently push the plastic tab at the end of the cartridge then pull it out from the printer.
- Get your new CompAndSave's Epson WorkForce WF-2630 ink cartridge, shake it about four to six times before opening from the package. Open it over a sink or garbage can to avoid any messes in case it leaks as sometimes, factories tend to overfill ink cartridges. Make sure to touch the plastic part only, then remove the covering tape that is usually bright in color as well as the plastic protective case, if there is, before installing it.
- Insert the Epson WorkForce 2630 ink cartridge to its respective slot, you should hear a snap indicating that it's locked in place.
- Close the scanner lid of the printer then press the "Start" button. The printer will go through the ink charging process, let this process run until its done to avoid wasting ink.
Epson WF-2630 Ink Cartridges FAQ
- What ink does Epson WF-2630 use?
- Epson WF-2630 printer only uses the Epson 220XL ink cartridges. It comes in black, cyan, magenta, and yellow.
- Why does my Epson printer says ink cartridge not recognized?
- There are several reasons why your printer won't recognize the ink cartridges. One example is bad cartridge chips, this is the most common reason why your printer won't detect the ink cartridge. To troubleshoot this, first, make sure the plastic strip that covered the vent hole has been removed. Also, check to see if the printer cable is not loose. Take the printer cartridge out of the machine. For 15 minutes, turn the printer off. Turn it back on and reset the printer factory default settings. For more detailed instruction click troubleshooting tips and you will be redirected to the right page.