Help Center - HP 920XL and HP 564XL cartridges not clicking into place during installation
Categories
Ink Knowledge
Printer Related Questions
Pre-purchase Questions
Ink Cartridge: Technical Issues, Troubleshooting & Installation Guide
Toner & Drum Unit: Technical Issues, Troubleshooting & Installation Guide
Fax Ribbon Refill Rolls: Technical Issues, Troubleshooting & Installation Guide
All About Paper & Sheets
Ink Refill / Bulk Ink
Cables
Pre-purchase Questions
Ink Cartridge: Technical Issues, Troubleshooting & Installation Guide
Toner & Drum Unit: Technical Issues, Troubleshooting & Installation Guide
Fax Ribbon Refill Rolls: Technical Issues, Troubleshooting & Installation Guide
All About Paper & Sheets
Ink Refill / Bulk Ink
Cables
HP 920XL and HP 564XL cartridges not clicking into place during installation
If your HP cartridge isn't clicking into it's slot properly, try bend the plastic arm outward from the cartridge about 1 inch while inserting it. It should "click" into the slot properly.
Other Related Articles:
- Why am I getting a Low Ink Error if my Ink Cartridge is Full?
- What are some common issues with inkjet printers that need troubleshooting?
- Cartridge is leaking
- My cartridge won't fit
- Low ink printer message
- HP Cartridge Troubleshooting Solutions
- Cartridge has a slightly different shape
- The print quality is not very good or the printout contains no ink (Dell, HP, Lexmark, Sharp)
- The print quality is not very good or the printout contains no ink (Brother, Canon, Epson, Xerox)
- The cartridge is not being recognized by the printer (Dell, HP, Lexmark, Sharp)
- The cartridge is not being recognized by the printer (Brother, Canon, Epson, Xerox)
- Cartridges with yellow/orange tape
- HP Cartridge Not Recognized Message for 932XL/933XL/950XL/951XL Cartridges
- HP 950XL/951XL Cartridge Protection Setting